The effect of feed solids concentration on flotation performance using the Reflux Flotation Cell

This study examines the separation performance achieved using the Reflux Flotation Cell (RFC) when treating low economic value coal waste streams over a range of feed solids concentrations. Feed solids concentrations of 1.3, 2.4 and 5.7 wt% were examined using a fine coal suspension of nominally 50 wt% head ash, covering the typical range emerging from the overflow of a desliming hydrocyclone. This work was also extended to include much higher levels of ultrafine gangue through the addition of significant levels of silica, resulting in an extreme feed ash of 97 wt% head ash, the aim being to assess whether these levels of gangue minerals affect hydrophobic particle capture. For the actual plant feed, as the feed solids concentration was increased the flux of hydrophobic particles fed to the RFC increased in a fixed ratio to the flux of hydrophilic particles. These results showed a greater gas flux was required to maintain combustible recovery as the feed flux of hydrophobic particles increased. The relationship between bubble surface coverage and hydrophobic particle recovery was also investigated. Estimates of the average bubble surface coverages, ranging 6–18%, showed a decreasing trend between recovery and surface coverage. By establishing a strong positive liquid bias flux, ∼0.7 cm/s in magnitude, the product ash was maintained within a narrow band of 7.0–11.9 wt% ash across the series of experiments, demonstrating consistent and strong product desliming over the up to 16-fold increase in feed solids concentration.