Bubble size distribution and turbulence characterization in a bubbly flow in the presence of surfactant

This study aimed to quantify the less explored complex multiphase hydrodynamics of a bubble swarm in the presence of surfactant which is the key to flotation process widely used in the resources and environmental engineering applications. Experiments were conducted in a rectangular column (cross-section: 100 mm × 100 mm) in batch mode by varying the gas flux (0.02 to and 0.08 cm/s) in the presence of an anionic surfactant sodium dodecyl sulphate (5 to 15 ppm). High-speed imaging was then used to visualise the unsteady bubble plume dispersion behaviour and estimate the bubble size distribution (BSD) which showed a reduction in the mean bubble size with the increasing gas flux and surfactant concentration. Next, particle image velocimetry (PIV) was utilised to measure the instantaneous velocity field which was used to determine the turbulence characteristics. It was shown that the bubble plume contributes to significant anisotropy in the flow field which increased in the higher surfactant concentration and gas flux cases. The energy containing turbulence length scale was characterized by the integral length scale, which was observed to increase linearly with both the gas flux and surfactant concentration. Also, the local turbulence energy dissipation rate exhibited a strong linear correlation with the bubble surface area flux parameter. In the presence of surfactant, the turbulence energy spectrum of the system exhibited a less steep slope in the inertial subrange regime compared to the Kolmogorov −5/3 slope. The spectrum also showed a leftward shift indicating energy addition to the larger turbulence length scales which was reflected in the formation of large recirculation zones around the bubble plume.